Electrical work cost in Orlando, FL

From one outlet to a whole-home rewire

Electrical work has one of the widest price ranges in home services. Adding a single outlet or swapping a fixture is a small, contained job. Upgrading your service panel is a much bigger one — This Old House puts a 100-to-200-amp panel upgrade at $1,300–$3,000, and a full panel job anywhere from $800 to $4,000. ¹ A whole-home rewire is bigger still, because it means running new wire through walls and ceilings across the entire house.

Why such a spread? Labor is usually the largest single factor on an electrical job. ¹ A device swap is minutes of work; a rewire is days of pulling wire, patching drywall, and re-terminating every circuit in the house.

What actually swings the price in Orlando

Prices for this project in the Orlando metro tend to run about 5% below the national average, reflecting lower local labor and material costs. For most electrical work, the number is driven by scope and access: how many circuits or devices are involved, whether the panel needs upsizing for the load (older 100-amp panels often can't handle modern EV chargers, heat pumps, and induction ranges), and how hard the wiring is to reach in finished walls.

Panel and service upgrades are where Orlando prices climb fastest, because they involve coordinating with the utility, the permit office, and sometimes a meter or service-entrance upgrade — not just the panel itself.

Permits and inspection aren't optional

This is the part that separates electrical from cosmetic home work: a permit and a code inspection are required, not a nice-to-have. Bob Vila is blunt about it — doing panel work without a permit "can result in major fines" ² — and reputable electricians will pull the permit and roll the cost (typically $50–$300) into the quote. ¹

The reason is safety. Panel and wiring work that isn't done to code is a shock and fire hazard, and unpermitted work can come back to bite you on insurance and at resale. ¹

Why licensed-and-permitted matters when comparing bids

Panel upgrades and rewires are explicitly not DIY-friendly jobs — they belong to a licensed electrician who knows local code. ¹² So when you compare Orlando quotes, the cheap bid that doesn't mention a permit or a license isn't a deal; it's a liability. Confirm each electrician is licensed, that the permit and inspection are in the price, and that the scope (number of circuits, panel amperage, what gets patched afterward) is spelled out.

Sesklo makes that apples-to-apples: pull electrical work quotes from licensed Orlando pros with the scope and permitting laid out, so you're choosing on the actual job, not on who left the most out.

Common questions about electrical projects in Orlando

Sources

1. This Old House — What Is the Cost to Upgrade an Electrical Panel? — 100-to-200-amp upgrade $1,300–$3,000 (panel job $800–$4,000); permits $50–$300; labor is the largest factor; not DIY-friendly; insurance/code risk.
2. Bob Vila — Electrical Panel Replacement Cost: A Homeowner Budget Guide — Permit required; fines for unpermitted work; a licensed electrician must do the work.